Amazon Fire Tablet is the ideal device to pass the time, as it offers many entertainment solutions with various Apps to watch your favorite shows and movies along with a wide range of books from the Amazon ecosystem among many other things. But what do you do when you can’t enjoy your Amazon Fire tablet won’t turn on?
One problem that a lot of Fire users have reported, however, is the issue when a Fire will just refuse to turn on. This is obviously a serious issue; if your Amazon Fire tablet won’t turn on, you can’t get to your data or use your apps. However, there are some things you can do to remedy the situation.
When you press the Power button in an incorrect manner, or there are some software issues, then the Amazon Fire tablet won’t turn ON. If you are also dealing with the same problem, you are at the right place. We bring a perfect guide that will help you fix the Amazon Fire tablet won’t turn ON issue. You must read till the very end to learn about the various tricks that will help you solve this problem.
How to fix your Amazon Fire that won’t turn on
There are basically three big reasons why a Fire might not turn on: a software issue may have locked the device (rather unlikely), a hardware component on the tablet may have failed (more likely), or finally something may be wrong. bad about battery (most likely). We will examine these problems for you and a few extras to see if we can fix the problem.
Usually, if your Fire tablet refuses to switch on, even when plugged in, then the battery doesn’t have enough power stored yet. This is especially the case with brand new devices, if it can also happen through general usage.
The only real solution is to wait a while. Just like a car won’t start if it’s been left running too long, your tablet’s battery needs to have built up enough charge to be able to begin the start up process. Make sure that the charge light has come on, and wait for five or ten minutes to give it enough time to power up sufficiently.
Method 1: Hold the Power Button
While handling the Amazon Fire tablet, the most frequent mistake made by users is that they leave the Power button after tapping it once. The correct way to turn it on is:
- 1. Hold the power button for at least more than 5 seconds.
- 2. After 5 seconds, you will hear a bootup sound, and the Amazon Fire tablet turns ON.
Method 2: Software Update
Few minutes of inactivity will cause the Amazon Fire tablet to enter into sleep mode. Sometimes, a running application might prevent the tablet from exiting sleep mode. Some may think that the device is not turning ON, but the device may actually be asleep. If the software is not updated to the latest version, it can create this issue. To fix it, follow the given simple steps:
- Hold the Power + Volume Up buttons for a minute. If the tablet is in sleep mode, it will be awake now.
- Again, hold the Power + Volume Up buttons together until you see Installing the latest software prompt on the screen.
- After the software update is complete, go for a soft reset explained in the method 3.
Once done, restart your device and enjoy using it!
Method 3: Charge the Tablet using AC Adapter
When the Amazon Fire tablet has zero power or less than adequate charge left, it will enter into power saver mode. At this stage, the tablet will not have sufficient power to reboot itself and won’t turn on.
Note: Charge your device before you start with the troubleshooting steps.
1. Connect the Amazon Fire tablet to its AC adapter and leave it for a few hours (approximately 3 or 4 hours) to charge the battery to full.
Tip: It is suggested to hold the Power button for twenty seconds and ensure that it is turned OFF before charging. This will release the Amazon Fire tablet from the power save mode. Also, it will no longer be in sleep mode.
2. You will notice a green light next to the power port once the Fire tablet gets enough power to reboot.
If the light does not switch from red to green, it indicates that your device is not getting charged at all. It may be a device issue, or you are not using the apt AC adapter for charging.
Method 4: Use the Correct AC Adapter
The AC adapter for the tablet and any smartphone looks similar, so there are high chances of these being swapped. Sometimes, your tablet will not turn ON even after hours of charging.
In this case, the problem lies in the AC adapter you are using.
- Use the correct AC official adapter, which has the Amazon logo on the side, for charging.
- Standard specifications for the charger are 1A and 5 Wats. Make sure you use an adapter with this configuration.
If you are confident that you are using a suitable AC adapter, but the tablet still does not turn ON; in this case:
- Ensure the cable is plugged correctly; it is neither cracked nor damaged.
- Ensure that the internal pins of the cable are not damaged.
- Confirm that the internal pins of the USB port are in proper condition.
- Make sure that the ends of the cable are not broken.
Tip: If your AC adapter and cable are in perfect working condition, and yet the issue persists, try replacing the AC adapter with a new one.
Method 5: Soft Reset Amazon Fire Tablet
- First, Press the Volume Down and the side button simultaneously, and hold them for some time.
- When you continuously hold these two buttons, your tablet screen turns complety black, and the Amazon logo appears. Release the buttons once you see the logo.
- It takes a while to restart; wait till your tablet wakes up again one more time.
These simple steps will restart your Amazon Fire tablet and resume its standard functionality.
Method 6: Factory reset your Fire
A factory reset is the task of last resort. If nothing else works, this is the final thing you can do before digging out your warranty or buying a new tablet. This obviously requires you to be able to load the Fire for even a short time. If you can, do this:
- Swipe down from the Fire home screen to access the menu.
- Select Settings and Device Options.
- Select Reset to Factory Defaults.
- Select Reset to confirm the reset.
A factory reset will wipe all of your data and settings from the device. If you can keep your Fire running long enough, save what you can to a computer before doing this. Most of your Amazon stuff will be stored in the cloud, but anything you added yourself will not be.
There are tutorials elsewhere online that suggest opening your Fire and shorting the battery to force a discharge. While this may work for some, I would not suggest doing it, especially if your tablet is under warranty. It will most certainly void that warranty and could ruin your battery. Only do this if you’re sure and your Fire is already out of warranty.
FINAL: Contact Amazon Service
We hope that this guide was helpful and you were able to fix the Amazon Fire Tablet won’t turn on issue.